Home
 Powder Coating Equipment
 Conveyors
 Spray Booths
 Ovens
 Turnkey Systems
 
 Equipment
 Raw Material
 Air Compressors
 Dust Collection, Filters
 Pre treatment Chemical 
 Masking Products
 Powder Coating Units
 Powder Manufacturers
 Testing Equipment
 Testing Labs
 
 Associations
 Consultants
 Used/Surplus equipment
 Books Periodicals
 Jobs/Appointments

 


 
 ASTM G 8
 
ASTM G 8 : Standard Test Method for Cathodic Disbonding of Pipeline Coatings



These test methods cover accelerated procedures for simultaneously determining comparative characteristics of insulating coating systems applied to steel pipe exterior for the purpose of preventing or mitigating corrosion that may occur in undergroung service where the pipe will be in contact with inland soils and may or may not receive cathodic protection. They are intended for use with samples of coated pipe taken from commercial production and are applicable to such samples when the coating is characterized by function as an electrical barrier.
This test method is intended for testing coatings submerged or immersed in the test solution at room temperature. When it is impractical to submerge or immerse the test specimen, Test Method G 95 may be considered where the test cell cemented to the surface of the coated pipe specimen. If higher temperatures are required, see Test Method G 42. If a specific test method is required with no options, see Test Method G 80.
The values stated in SI units to 3 significant decimals are to be regarded as the standard. The values given in parentheses are for information only.
<more>